Room mode calculator
Below a few hundred hertz, a room's own resonances shape the bass you hear more than the subwoofer does. This calculator lists those resonances (room modes) for a rectangular room, shows where axial modes from different dimensions stack up, and estimates the frequency above which individual modes stop dominating.
Results are estimates for planning. Check the manufacturer's manual before you drill, buy or mount anything.
How it works
A room mode is a standing wave between surfaces. For a rectangular room with length L, width W and height H, each mode has the frequency
f = (c / 2) × √[(p/L)² + (q/W)² + (r/H)²]
where c is the speed of sound (343 m/s at about 20 °C) and p, q, r are whole numbers. When only one index is non-zero the mode is axial (between two opposite surfaces, usually the strongest); two non-zero indices give a tangential mode and three an oblique mode, each weaker than the last.
The Schroeder frequency estimates where the room stops behaving as a set of separate resonances: fS ≈ 2000 × √(RT60 / V), with RT60 in seconds and volume V in cubic meters. Below it, seat position, subwoofer position and bass treatment matter most; above it, the room behaves more evenly.
Assumptions and limits
- It assumes a closed rectangular room with rigid walls. Openings, soft walls and irregular shapes move and weaken modes.
- The 5% stacking flag is a simple screening rule we chose for this page, not an industry standard.
- If you do not know your room's RT60, 0.3–0.5 s is a common range for furnished living rooms; the Schroeder estimate moves with it.
Sources
- Room modes (Wikipedia): formula and mode types
- Schroeder frequency (Wikipedia)
- F. A. Everest & K. C. Pohlmann, Master Handbook of Acoustics (McGraw-Hill)
Last reviewed: November 2026.